PORTABLE MODULAR CONVEYOR
By E2 Systems, LLC

Operator Control
• Conveniently controlled from operator's position in loader cab
• Belt speed is controlled by the RPM of the loader engine
• Flow control valve will limit flow and speed if required
• Folding and Travel features controlled from controls on the conveyor base

Hydraulic System
• Low torque, high speed hydraulic motor
• Loader pump capacity must match conveyor motor
• Minimum requirements, 40 g/m @ 3000 psi
• Oil supply to the conveyor motor is from loader
• A third valve function control is required

Receiving Hopper
• Receiving hopper will hold up to 2 cubic yards of material, but the placer is designed to move the material as it is loaded
• Hopper and conveyor can be hydraulically shifted to the left or right 2 feet of center to adjust dumping position

Conveyor Details
• Conveyor folds at midpoint to travel in a 10' path while attached to loader
• Belt speed is approximately 550 f/m
• Belt width is 60"
• 3 ply belting
• Conveyor length is 21' head pulley to tail pulley
• Top edge of hopper at rubber bumper is 30"
• Height clearance at center of belt in hopper 23"

Adaptability
• Conveyor may be rotated 180 degrees to accommodate desired travel direction
• Compatible with most manufactures wheel loaders and other modular equipment
• Can handle any flowable materials

Dimensions
• Working length attached to loader is 21'6"
• Traveling length attached to loader is 10'
• Unit width is 8'6'
• Unit is a legal load for transportation on flatbed trailer at 8'6" x 21'6"
• Approximate weight is 9,800 pounds.